mastodontech.de ist einer von vielen unabhängigen Mastodon-Servern, mit dem du dich im Fediverse beteiligen kannst.
Offen für alle (über 16) und bereitgestellt von Markus'Blog

Serverstatistik:

1,4 Tsd.
aktive Profile

#fusion360

0 Beiträge0 Beteiligte0 Beiträge heute
Antwortete im Thread

I made a relatively simple thing that brings Fusion 360 to its knees. As in, every change, no matter how trivial, takes over a minute to recompute.

It's the outline shown above, extruded and filleted, then chamfered around the top edge. It ran fine until the chamfer. F360 can't calculate the chamfer directly; I had to do nonsense with a tapered extrusion.

🧵 14/N

Antwortete im Thread

Today is G2 continuity day! I learned this morning that Fusion 360 can do G2 continuous fillets, and I needed to model this anyway...

According to the color map (right image), the fillets are G2 to the bottom, but the small fillet isn't G2 to the sides. And the corners are awful. I don't know what to do about those.

If you think this is going to be another Gridfinity bin, you're close but not right.

🧵 13/N

Maybe this will reach a Fusion 360 expert.
Trying to parameterize a bike strap model to motr easily make different lengths. It starts off with a coil (which determines length, thickness) which is extruded. Then an oval hole is made added with pattern on path used to replicate it down rest of the band. Overall most of it works when changing length, but pattern on path gets messed up. I think it boils down to start point needing to be dragged back to original hole, then distance and quantity manually adjusted. Just wondering if there's a programmatic way of doing this instead of manually editing features each time. I suppose learning Freecad might be long term an option.

ES IST WIEDER KLICK CUT CODE ! \O/

🏆 So entstehen die Preise für KLICK CUT CODE – mit 3D-Drucker, Fräse und viel Liebe fürs Detail ✨

Nur noch wenige Tage bis zum großen Medienfest am 28.06. im #freilichtmuseumamkiekeberg im #landkreisharburg – wir freuen uns auf euch! 💻🎬🎮

🎶 Music: Maksym Malko via Pixabay

#KlickCutCode #Medienfest #3DDruck #Fusion360 #DigitalesHandwerk #Pokale #MakerSpace #Preisverleihung

video.medienzentrum-harburg.de

Antwortete im Thread

@3dprinting I've been struggling to visualize the FilaBilly Humidor's power inlet. I think this design will work. It looks like it can be printed, wired and assembled.

It needs to be thin to fit the side of the BILLY behind the spools. This is just 39.6mm wide, and it clears the spools by 5mm. It will be right up against the BILLY's back wall.

One outlet is for the dehumidifier, and the other is for the lights and sensors.

🧵 40/N